Imagine communications Selenio 6800 SFS6803+OP+SFS+, Installation And Operation Manual

Page: 67 / 118

SFS6803
+
and OP
+
SFS
+
Installation and Operation Manual
53
Input > Audio > V-bit
V-bit Mute Enable 4, C Enables automatic muting
of audio outputs when
the V-bit is set
Note: Muting on a detected
V-Bit applies to PCM audio
channels only. Non-PCM
audio channels will not be
muted.

No

Yes
Aud Ch(1-32)
(SRC1a-16b) V-bit
Status Reports the validity bit
status of the specified
audio channel

Off

On
Input > Audio > Format
Aud Ch(1-32)
(SRC1a-16b) Format 1, 9


3, A
Selects the AES format
(Auto/PCM/Non-PCM) of
the selected input audio
channel

Auto

PCM

Non-PCM
Input > Audio > Status
Dmx Ch (1–16)
Status Reports the current status
of the specified
deembedded audio
channel

Normal

Silence

Peak

Not Present
Input AES (1A–8B)
Status Reports the current status
of the specified audio
input channel

Normal

Silence

Peak

Not Present
Input Analog Audio
Ch (1A - 4B) Status Reports the current status
of the specified analog
audio input channel
(SFS6803
+
AI
+
T and
OP
+
SFS
+
AI
+
T only)

Normal

Silence

Peak

Not Present
Input > Audio > Embedded
Group (1–4) present Reports the presence of
the specified audio group
in the SDI signal

No

Yes
Input > Audio > Embedded > Error Status
Group (1–4)
Checksum Error Reports if a checksum
error has occurred in the
specified group’s
embedder

No

Yes
Group (1–4) DBN
Error Reports if a data block
number error has
occurred in the specified
group’s embedder

No

Yes
Table 3-12 SFS6803
+
and OP
+
SFS
+
Parameters (Continued)
Path Parameter Name
Bank/
Switch
Function Options or User Range