Chapter 3
Operation
38
Seamless
Sound
Function
When used in conjunction with HMX6803
+
as a de-embedder and with HDX6803
+
as an
embedder, the SFS6803
+
can provide an uninterrupted (“popless”) embedding and
de-embedding path for the discrete audio channels regardless of the presence or input
switching of the video, as long as a constant video standard is maintained.
SFS6803
+
/OP
+
SFS
+
connected to HDX6803
+
/OP
+
HDX
+
SFS6803
+
/OP
+
SFS
+
parameter settings (embedding module):
Set the
Seamless Sound Enable
parameter (Processing > Audio) to
Enable
.
Set the
Audio LOV Output Mode
to
Pass
.
Note:
AES outputs in this mode are not AES11 alignment compliant and are not aligned
with video.
If an audio group already exists and you want to replace it, set the
ADS Clean
parameter to
Yes
(Processing > Audio > Embedding).
Note:
The
ADS Clean
parameter removes all audio groups from the video stream.
If an audio group already exists and you do not want to replace it, or if the audio group to
be embedded does not exist, set the
ADS Clean
parameter to
No
(Processing > Audio >
Embedding).
To set an audio group to be embedded in Append mode, set the
Audio Group 1-4
Embedding Mode
parameter to
Append
(Processing > Audio > Embedding).
For optional minimum propagation delay, set the
Frame Sync Bypass
parameter to
Yes
(Processing > Video > Synchronization).
HDX6803
+
/OP
+
HDX
+
parameter settings (deembedding module):
Set the
Seamless Sound Enable
parameter (Processing > Audio) to
Enable
.
Set the
Audio LOV Output Mode
to
Pass
.
To set the AES output(s) to be sourced directly from the audio deembedder using the
appropriate Demux Ch source, set the
Output AES 1-8 Source Select
parameters to
Demux Ch 1/2
,
Demux Ch 3/4
, etc. (Output > Audio Source Select > AES Audio).
For optional minimum propagation delay, set the
Video Delay Bypass
parameter to
Yes
(Processing > Video > Delay).
HMX6803
+
/OP
+
HMX
+
connected to SFS6803
+
/OP
+
SFS
+
HMX6803
+
/OP
+
HMX
+
parameter settings (embedding module):
Set the
Seamless Sound Enable
parameter (Processing > Audio) to
Enable
.
Set the
Audio LOV Output Mode
to
Pass
.
If an audio group already exists and you want to replace it, set the
ADS Clean
parameter to
Yes
(Processing > Audio > Embedding).
Summary of Contents for Selenio 6800 SFS6803+OP+SFS+
