Imagine communications Selenio 6800 SFS6803+OP+SFS+, Installation And Operation Manual

Page: 47 / 118

SFS6803
+
and OP
+
SFS
+
Installation and Operation Manual
33
Figure 3-8 shows how overwrite embedding appears in the ancillary data space when there
is auxiliary data where Group 1 should be inserted.
Figure 3-8 Overwrite Embedding Mode When There is Auxiliary Data on Group 1
Figure 3-9 shows how overwrite embedding appears in the ancillary data space when there
is pre-existing Group 1 audio. This operation is successful.
Figure 3-9 Overwrite Embedding Mode When There is Group 1 Audio in the Group 1
Space
Audio
Embedding
Errors
Table 3-4 describes Group ( 1–4 ) Append Embedding Error and Group ( 1–4 ) Overwrite
Embed Error audio embedding errors (also see page 61).
To avoid embedding errors, follow these guidelines:
EAV
ADS before embedding
other
auxilliary data
A
other
auxilliary data
B
ADS after attempting to embed group 1
EAV
other
auxilliary data
A
other
auxilliary data
B
Result: Error is returned
ADS after embedding group 1
(with overwrite group specified as Group 1)
Group 1
EAV
ADS before embedding
Pre-existing Group 1 EAV
Table 3-4 Audio Embedding Error Descriptions
Error Description
Group (1–4)
Append
Embedding
Error This error occurs if the embedder is set to Append
mode for a particular audio group, but that audio
group already exists in the incoming SDI signal.
In this case, the embedder does not embed another
audio data and control packet of the same audio
group, as this results in incorrect audio sample
distribution.
Group (1–4)
Overwrite
Embed Error This error occurs if the embedder is set to Overwrite
mode for a particular audio group, but that audio
group does not exist in the incoming SDI signal.