Imagine communications Selenio 6800 SFS6803+OP+SFS+, Installation And Operation Manual

Page: 57 / 118

SFS6803
+
and OP
+
SFS
+
Installation and Operation Manual
43
ADS Clean
Parameter Depending on the setting of the ADS Clean parameter (listed on page 56), the Audio
Group ( 1–4 ) Embedding Mode parameters have different options.
Frame Sync
Bypass
Parameter
When the Frame Sync Bypass parameter is set to Yes , the following parameters are
disabled:

Test Pattern Select

Test Pattern Enable

Frame Sync Mode

Force Freeze Type

Force Freeze

Loss of Video Output Mode

Output Video Frozen

Horizontal Phase

Vertical Phase

Video Delay

Audio/Video Align

Genlock Video Locked
When the Frame Sync Bypass parameter is set to No , these parameters are enabled.
PCM/
Non-PCM
Settings
If a channel’s format is PCM, that channel’s Gain and Invert parameters are activated. (The
parameters are listed on page 59.)
Table 3-9 describes how the PCM format setting for Output Embedded Ch 1 affects the
Gain and Invert options for embedded channel 1. Similar conditions apply to channels 2-16
and AES Outputs 1A–8B when their audio formats are changed.
Table 3-8 ADS Clean Parameter
ADS Clean
State Audio Group (1–4)
Embedding Mode Options
Yes

Off

Append
No

Off

Append

OverWrt

Auto