SFS6803
+
and OP
+
SFS
+
Installation and Operation Manual
21
See the
6800
+
Frame Installation and Operation Manual
for information about installing
and operating an FR6802
+
QXF, FR6822
+,
or FR6802
+
frame and its components.
CAUTION: Before installing this product, read the 6800
+
Series Safety Instructions
and Standards Manual shipped with every 6800
+
Frame Installation and Operation
Manual or downloadable from our website. This safety manual contains important
information about the safe installation and operation of 6800
+
series products.
Installing 6800
+
Modules
Required Frames and Back Connector Types
SFS6803
+
and OP
+
SFS
+
modules have double-width back connectors that can be installed
in an FR6802
+
XF, FR6822
+
, or FR6802
+
QXF frame. SFS6803
+
and OP
+
SFS
+
modules
cannot be installed in an FR6802
+
DM frame, a FR6800/7000 frame, or a frame without
fans.
See your
6800
+
Frame Installation and Operation Manual
for details on installing back
connectors in a frame.
A FR6802
+
RM (Rear Support Extension Rails for 6800
+
series frames) option is
recommended for the SFS6803
+
and OP
+
SFS
+
modules. See your
6800
+
Frame Installation
and Operation Manual
for installation instructions.
Installing and Removing SFS6803
+
Modules
These modules require no specialized installation or removal procedures. However, if
installing both front and rear modules, ensure that the back module is installed first before
plugging in the front module.
When removing both the front and rear modules, ensure that the front module is
unplugged from the frame first, before removing the rear module.
See your
6800
+
Frame Installation and Operation Manual
for information about
installing and operating a frame and its components.
See the
6800
+
Safety Instructions and Standards Manual
for important information
about safely installing your module.
Once you have installed your SFS6803
+
and OP
+
SFS
+
modules, you can connect them to
the appropriate input and outputs.
Installing
OP
+
SFS
+
Modules
Front and back modules in the OPTO
+
series have plastic caps that protect the fragile laser
connections from damage. You must remove these protective covers before you install the
back and front modules (see
Summary of Contents for Selenio 6800 SFS6803+OP+SFS+
