background image

Service Manual

Philips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

  

Food 

processor

HR7600
HR7605

03/07

PRODUCT INFORMATION

-  This product meets the requirements regarding 

interference suppression on radio and TV.

-  After the product has been repaired, it should function 

properly and has to meet the safety requirements as 
officially laid down at this moment.

TECHNICAL INFORMATION

- Motor consumption 

: 350 Watt

-  Voltage & frequency 

:  220 - 240 V / 50 - 60 Hz

-  Cordset 

:  150 cm double insulated 

 

  with moulded plug

-  Speed setting 

:  1 speed + pulse

-  Bowl max. capacity 

:  2.1 l dry ingredients

 

  1.5 l liquids

-  Bowl 

:  not suitable for the micro wave

-  Ingredients 

:  max. 80 °C / 175 °F

-  Dimensions product 

:  230 x 180 x 235 mm

-  Weight product 

:  1.4 kg

This appliance is equipped with an automatic thermal 
cut-out system. This system will automatically cut off the 
power supply to the appliance in case of overheating.

If the appliance suddenly stops running:

1.  Pull the mains plug out of the socket.
2.  Set the speed control to ‘0’.
3.  Let the appliance cool down for 60 minutes. Then the 

appliance is ready for use again.

4.  Put the mains plug back into the socket.
5.  Switch the appliance on again.

Summary of Contents for HR7600

Page 1: ...oltage frequency 220 240 V 50 60 Hz Cordset 150 cm double insulated with moulded plug Speed setting 1 speed pulse Bowl max capacity 2 1 l dry ingredients 1 5 l liquids Bowl not suitable for the micro wave Ingredients max 80 C 175 F Dimensions product 230 x 180 x 235 mm Weight product 1 4 kg This appliance is equipped with an automatic thermal cut out system This system will automatically cut off t...

Page 2: ...rease 4822 390 20004 to lubricate the parts of the gearbox 2 3 3 50 0 15 Note Support the rotorshaft to prevent forces on the motor bearings during the assembly of the pinion on the rotorshaft OPTIONAL accessories No specific issues M Thermal cut out Pulse 0 1 Microswitch Safety switch C AC 2 4 ...

Page 3: ... 4203 065 63060 4203 065 63050 4203 065 64700 4203 065 63090 4203 065 63110 4822 276 31591 4203 065 59770 4203 065 63080 4203 065 63030 4203 065 63120 Upper housing assy Gearbox motor assy Gearbox assy Release lever L R Bottom housing HR7600 HR7605 Coupling piece Micro switch Wire connector for two wires Rubber plate Detection piece Cordset Rubber buffer ...

Page 4: ...for HR7605 or for HR7600 only in combination with POS 5 when the stock of 4203 065 62990 is empty Insert shredding fine opt Pos Service code Description 20 21 22 23 24 25 26 27 28 4203 065 61560 4203 065 62310 4203 065 63020 4203 065 63010 4203 065 63160 4203 065 63000 4203 065 61540 4203 065 61530 4203 065 61570 Insert shredding medium Insert shredding coarse opt Insert holder Knife unit Emulsif ...

Reviews: