Imagine communications Selenio 6800 HUC6800, Installation And Operation Manual

Page: 64 / 84

50 HUC6800
+
Installation and Operation Manual
Chapter 3: Operation
Module Status LEDs
The HUC6800
+
and HUC6800
+
C modules do not have any card-edge
alarms. Instead, module status LEDs on the corner of the module light
up if an error is detected. See
Figure 3-2 on page 48 for the location of
these LEDs, and Table 3-7 for a definition of the LED colors.
Alarms are usually logged and monitored within software control
applications such as
+
PilotLite or CCS Pilot. See the appropriate
software control user manual or online help for more information.
Alarms
Table 3-8 describes the specific alarms for HUC6800
+
and
HUC6800
+
C modules. You can only identify specific alarms using a
software control application.
Note
If the LED is flashing red,
please contact your customer
service representative.
Table 3-7. LED Color and Meaning
LED Color
Sequence
Meaning
Off There is no power to the module; the module is not
operational.
Green There is power to the module; the module is operating
properly.
Red There is an alarm condition.
Flashing Red The module has detected a hardware/firmware fault.
Amber The module is undergoing configuration.
Table 3-8. HUC6800
+
Alarms
Alarm Name Alarm Description Alarm Level
SDI IP Video Present Loss of SDI input video Major
RefLockedAlarm Loss of locked reference Major
RefStdMismatch Mismatch between reference
video and video standard Major