IMAGENEX DT101Xi, Technical Manual

Page: 57 / 64

Doc no: 430-041-01 57 of 64
7. Ethernet (SIR Processing and Beamforming Computer)
•
Standard 100 Mbps Ethernet via RJ45 connector. Recommended wired as T-568B (no
crossover):
Pin Colour
1 White/Orange (Tr)
2 Orange (Transmit -)
3 White/Green (R)
4 Blue
5 White/Blue
6 Green (Receive -)
7 White/Brown
8 Brown
Table 6-11
•
SIR Processing and Beamforming Computer to run DT101Xi_SIR software.
•
TCP/IP and UDP setup see (APPENDIX D)
8. Ethernet (Data acquisition (navigation) computer)
•
Standard 100 Mbps Ethernet via RJ45 connector. Recommended specification is Cat 5e and
wiring scheme
T-568B (no crossover):
Pin Colour
1 White/Orange (Tr)
2 Orange (Transmit -)
3 White/Green (R)
4 Blue
5 White/Blue
6 Green (Receive -)
7 White/Brown
8 Brown
Table 6-12
•
Navigation computer running acquisition software and receiving D1P datagram ( Error! Reference s
ource not found. ).
•
For TCP/IP and UDP setup see APPENDIX D
•
It is recommended that the proprietary IGX data format is logged during all operations as this format
may be used to diagnose any issues that may have occurred, as well as generate (through utility
programs) a D1P (point output) and a D1B (beam output). These formats may be useful for
diagnostics and importation into other programs.