IMAGENEX DT101Xi, Technical Manual

Page: 62 / 64

Doc no: 430-041-01 62 of 64
Remove any firewalls present
•
Select the “Advanced” Tab. De-select the Firewall option (if present).
Click
‘Configure’ (in the General tab).
•
Set Link speed to “Auto” or “10Mbps”
•
In the ‘Advanced’ tab, select ‘Link Speed / Duplex Mode’ and set to either ‘Auto Mode’ or ‘10 Full Mode’.
•
Disable any power saving that shuts down the Ethernet card.
•
In the “Advanced” tab, select “Link Down Power Saving” and set to “
Disable
”.
•
In the “Power Management” tab, de-select any power saving option.
•
Repair the Ethernet connection. Windows
™ remembers the hardware address for each socket. To clear
the Windows
™ settings, right-click on the Local Area Connection and select ‘Repair’.