IMAGENEX DT101Xi, Technical Manual

Page: 64 / 64

Doc no: 430-041-01 64 of 64
No Check Document No Page
Software configuration
30. Set Range (1.5 to 2 X water depth) 430-040-00 7
31. Set Gain (start at 10 dB and adjust) 430-040-00 7
32. Set Display Gain (50%) 430-040-00
33. Set-up IP addresses 430-040-00 11
34. Set-up units 430-040-00 11
35. Set-up max file size if required 430-040-00 11
36. Set-up heading input port (Gyro or DGNSS) 430-040-00 12
37. Set-up MRU Input port (Integrated or external MRU) 430-040-00 12
38. Set-up sound velocity source 430-040-00 12
39. Enable Overlap Sonar I/O (for faster ping rate) 430-040-00 12
40. Set-up sector size 430-040-00 13
41. Set-up number of beams 430-040-00 13
42. Set-up averaging 430-040-00 13
43. Enable gain equalization 430-040-00 13
44. Enable Automatic Gain Control 430-040-00 17
45. Select preferred profile point display (Usually High mix) 430-040-00 18
46. Set Profile Point Detection Min and Max (text box or handles) 430-040-00 18
47. Select Profile Point Filter type. 430-040-00 19
48. Select Display settings 430-040-00 19
49. Apply Roll Correction 430-040-00 20
50. Apply tilt angle 430-040-00 21
51. Ensure Data Output is set to D1P for most applications 430-040-00 22
No Check Document No Page
Operation
52. Conduct regular SV cast 430-0
41
-00 18
53. Log .IGX file 430-0
40
-00 9