Mobile DVR - Installation Manual
44/47
7. Change the port number. Select from 2500 to 2509 and any port number in the range. Press the Enter button to save the change. Please
remember the IP and Port number. The information will be required to set the program.
8. Press Esc button to escape. If you did sign for DDNS, go back to ‘NETWORK SETUP’ by pressing Esc button. Then, press
∨
button
and press the Enter button to enter ‘DDNS SETUP’.
9. Put your ID and Password that are registered in nameip service registration. Press Enter button and use
-
or +
button to change the
value. To move the cursor, press
>
and
<
buttons. Once you complete the entering, press the Enter button to save the changes.
10. Network setup of DVR is now finished. Press Esc button to escape. Follow the next chapter to set IP sharing router.
6.3.1 Information on IP setting
- IP (Internet Protocol), Subnet Mask, Gateway: IP address and a subnet mask must be given to DVR in order to communicate with it over
network. DVR requires a Static IP address, a Dynamic IP address or domain name.
- DHCP (Dynamic Host Configuration Protocol): DHCP can be used to automatically assign IP addresses, to deliver TCP/IP stack
configuration parameters such as the subnet mask and gateway. Set ‘ENABLE’ to obtain IP, Subnet Mask and Gateway address
automatically.
- Mac Addr: On a local area network, the MAC (Media Access Control) is your computer's unique hardware number.
