Mobile DVR - Installation Manual
29/47
5.2.3 Installing External HDD Rack Case
After installing IEEE-1394 card, you need to install the Rack Case. Rack Case is needed to play many Hard Disk Drives at once. Also, it
helps users to use software more easily. At the time of writing, Rack Cases are available with single bay, 2 bays, 4 bays and 8 bays.
You will need following items to continue the Rack Case installation;
- Rack case (Single Bay, 2 Bays, 4 Bays or 8 Bays)
- IEEE 6:6 1394 Cable X 2 or X4
- Power Cable
NOTE
If you want to use 8 bays Rack Case, you need to install two IEEE-1394 Interface Cards
To use this option, user needs following items.
IEEE 1394 Interface Card
- Select one of right external hard disk drives. Each drives has different number of slots. Single, 2, 4 and 8 slots are available.
Cable for installation
- IEEE 6:6 1394 cable and power cable is needed for installation
Please follow the below instructions to install the Rack Case.
1. Connect IEEE 6:6 1394 Cable to empty slot on IEEE 1394 Card. Most of IEEE 1394 card has three slots. You can plug into any of empty
slots.
2. Connect the other ends to a connector on rear of external drive.