Mobile DVR - Installation Manual
17/47
3.1.12 Switching NTSC or PAL
The DVR can be used with either NTSC or PAL mode. The system will automatically detect the video mode from channel 1 video source. If
the camera 1 sets as NTSC mode, the system will turn to NTSC mode.
VIDEO MODE switched to PAL MODE VIDEO MODE switched to NTSC MODE
CAUTION
If the user had set the mode wrong or the monitor does not support different video mode, the screen may be in blank or the
screen will be displayed as below.
To switch Portable Controller to PAL or NTSC mode, toggle the switch on the left side of Portable Controller.
NTSC or PAL switch: There is a switch located
on the left side of the Portable Controller
.