Mobile DVR - Installation Manual
11/47
2.2 Rear Panel
The following is the rear panel of the DVR.
Note
The configuration differs according to the model.
No.
Name
Functions
1
Camera Input (BNC)
Connect to Camera (supports NTSC/PAL)
2
Monitor Out (BNC)
Connect to the main monitor for camera image surveillance/management/playback
3
S-Video
Secondary main monitor output
4
RS-232
Serial port to communicate with PC through RS-232 cable
5
Alarm/Relay
Connector for alarm and relay
6 LAN
Port
RJ-45 socket for 10/100 Ethernet connection. Link LED is lit when DVR is connected to the network. And Act
LED is lit when the network connection is through 10Mbit.
7
Adaptor (DC 12~30V)
Connector
DVR requires DC 12~30V adaptor. Do not use any other adaptors unless, it is approved by the dealer or
installer. Please use the one supplied only. Large capacity HDD requires high voltage adaptor. See below
table for more information.
HDD
Capacity
DC Adaptor
Under 120GB
Under 200GB
Under 400GB
12V (3A)
Supported
-
-
18V
(2.5A) Supported Supported -
24V
(1.5A) Supported Supported Supported
8
Power Button
Use to turn the Power On/Off.
9
Power Switch
Power Switch
Note
Ensure that the specification of the DVR agrees with the specification for the peripheral devices. For details about adding additional
peripheral devices, consult your dealer or installer
1
3
4
5
6
7
8
2
9