Page 78
Setup Manual
Note:
The menus described in chapters E.4.2.7 to E.4.2.10 concerning the wireless
LAN configuration will only be displayed if a WLAN module is installed in the
scanner.
E.4.2.7 Wireless LAN (Basic Settings)
Use the function
Wireless LAN (Basic Settings)
to define the basic settings for the
WLAN module.
Note:
This menu is displayed only if a WLAN module is installed and if the settings for
IPv4 (Network Interface 1)
and
Wireless LAN (LAN Interface)
fit together.
Picture 72: Wireless LAN Basic Settings
Note:
The default settings are recommended.
Band
Click on the selection arrow to open the list.
Select from the list the desired band for the WLAN communication.
SSID
Enter a name to identify the WLAN of the scanner.
Channel Number
Auto
: Recommended setting. Uses the channel with the best data
transfer performance.
To use a specific channel, click the selection arrow and select the
desired channel from the list.
Broadcast SSID
The broadcast SSID is set automatically.
After modifying the WLAN parameters, click at the Apply button to transfer the new
settings.
Follow the note regarding the reboot sequence.
Summary of Contents for Wide Tek WT 36C
Page 1: ...Setup Manual...
