Image Access Wide Tek WT 36C Setup Manual Download Page 6

Page: 6 / 121

Page 6

Setup Manual

Version History

Version Published in

Content/Changes/Supplements

May 2011

Preliminary version.
Description of the device elements.
Description of assembling steps.

October 2011

First release.

Additional information for menu contents.
Minor modification in technical data.

December 2011

Update Technical Data.

January 2012

Additional information about connectors at the bottom and back
side in chapter 3.x

March 2013

Wide

TEK

36C

and

Wide

TEK

48C

have

been introduced.
New: Chapter C.4 Monitor Mount.
Previous chapter B.5 and all following chapters renumbered.

January 2014

Wide

TEK

36C

and

Wide

TEK

48C

scanners merged to one manual. The differences between the
models are highlighted if necessary.

January 2015

Copyright note updated.
Information about white balance function (chapter D.1.1)
added, all following chapter renumbered.

March 2015

Chapter E.4.1.10 Description of document cache settings
added.

Summary of Contents for Wide Tek WT 36C


























































































































Search results

Summary of Contents for Wide Tek WT 36C

Reviews:

Related manuals for Wide Tek WT 36C

Brands by name

Popular brands

Image Access Wide Tek WT 36C, Setup Manual

Search results

Summary of Contents for Wide Tek WT 36C

Reviews:

Related manuals for Wide Tek WT 36C

Brands by name

Popular brands