Image Access Wide Tek WT 36C, Setup Manual

Page: 42 / 121

Page 42 Setup Manual
D.2 IP Address
Picture 38: IP Address mask
To change or define the numeric values which make up an IP address, touch the number
in the respective line of IP address, gateway or netmask.
An additional window opens where a numeric keyboard allows
changing the selected value.
Touch the desired position in the respective row to move the
cursor to that position.
To delete a digit, move the cursor to the right of the digit and
press the “
<= ” button. Digits will always be deleted from right
to left.
The keys arrow left and arrow right beside the “0” move the
cursor in the line.
Touch Ok button to complete the entry.
Set network settings Saves the new or modified values when pressed.
Reset to Factory Resets all network parameters to factory default settings.
Reset network settings Resets all network parameters to previously defined value
when pressed.
If a WLAN module is installed in the scanner, the name and the IP address will be
displayed below the line Enter new netmask .
Device type and the firmware version are displayed in the bottom line of the screen.