Setup Manual
Page 107
With the buttons
Stitching 0
to
Stitching 3
cut-outs at four different positions can be
displayed.
The left cut-out shows the stitching between the camera 1 and camera 2, the right cut-out
shows the stitching between camera 2 and camera 3.
Use the buttons
Y+
and
Y-
below the left cut-out to shift the picture of camera 1 against
the picture of camera 2 in horizontal direction.
Use the buttons
Y+
and
Y-
below the right cut-out to shift the picture of camera 2 against
the picture of camera 3 in horizontal direction.
Use the buttons
Stitching 0
to
Stitching 3
to check the results at defined horizontal
positions.
Target is to get a result with a small shifting in both displayed cut-outs.
Below the
Y-
buttons a green OK signalizes that the stitching correction is set to matching
parameters.
If the shifting in both cut-outs is set to a minimum click the button Back to Main Menu
or the button Back to Adjustment Menu to save the settings and to return to the
respective menus.
Summary of Contents for Wide Tek WT 36C
Page 1: ...Setup Manual...
