Page 32
Setup Manual
Place the upper longitudinal feet (item #6) at the vertical legs. The oval cut-out must face
to the inner side.
Picture 23: Upper longitudinal foot on vertical leg
Insert the second crossbeam between the vertical legs.
Picture 24: Upper crossbeam inserted
Assemble the upper crossbeam, the upper longitudinal feet and the vertical legs at both
sides with two ISO 4016 – M8x50x22-WS screws and washers at each screw.
Tighten the screws with the combination wrench, size 13.
Summary of Contents for Wide Tek WT 36C
Page 1: ...Setup Manual...
