11
TORQUE MEASUREMENT
SPECIAL APPLICATION
PASS/FAIL COUNTER
9
o
n
4
r
CYCLE WITH – or +/C KEYS
CYCLE WITH – or +/C KEYS
With the power OFF, press and hold the
M
button and then press and release
(do not hold)
P
. When
1
appears, press
M
again until
4
appears.
1. Press
–
or
+/C
to change to:
4
r
O
n
Counts correctly torqued fas-
teners between low and high
limits in the clockwise direc-
tion (for right hand threads).
4L O
n
Counts correctly torqued fas-
teners between low and high
limits in the counterclockwise
direction (for left hand
threads).
OFF
No counter, general operation
After selecting
4
r
0
n
or
4L 0
n
press
and hold the
P
button for more than
two seconds to power OFF and store
the setting.
2. Press and release (do not hold)
P
to
turn ON the power, and
c
appears on
the left-side of the display to indicate
Pass/Fail counter is ON. Press the
M
button to set the low torque limit.
Special applications may require counting fasteners correctly torqued
between low and high setpoints. Counter operates in peak mode.
0
c
beep
o
n
4L
For General Operation Skip this Section
