13
TORQUE MEASUREMENT
For General Operation Skip this Section
9.90
J
lbf-in
12.18
J
lbf-in
13.96
J
lbf-in
beeeep!
bip, bip, bip...
bip,bip,bip,bip,bip...
Only torque values within the low and
high limits are counted. When torque is
applied a
J
appears on the left-side of
the screen. Values under 90% of the low
limit are not signaled or counted.
Note: The preset alert starts at or above
10% of driver capacity.
Values between 90% and 100% of the
low limit
are indicated by intermit-
tent LED and audible alerts and are
not counted.
Values between the
low and high
limits
are indicated by a continuous
LED and audible alert and are counted.
Values
above the high limit
are indi-
cated by a fast intermittent signal
with LED and audible alerts and are
not counted
Press
+/C
to clear the value, press again
to clear the count.
To Return to General Operation
Press and hold the
M
button and then
press
P
to turn ON. When
1
appears,
press
M
repeatedly until
4
appears.
1. Press
–
or
+/C
to select
OFF
for no
counter and general operation.
2. Press and hold
P
for more than two
seconds to power OFF and save.
2
1
3
PASS/FAIL COUNTER OPERATION
TORQUE V
ALUE
90% OF LOW
90% OF LOW
LOW
LOW
HIGH
HIGH
INTERMITTENT ALERTS
INTERMITTENT ALERTS
FAST INTERMITTENT ALERTS
FAST INTERMITTENT ALERTS
COUNTED BETWEEN LOW & HIGH LIMITS
COUNTED BETWEEN LOW & HIGH LIMITS
NOT COUNTED BELOW LOW LIMIT
NOT COUNTED BELOW LOW LIMIT
NOT COUNTED ABOVE HIGH LIMIT
NOT COUNTED ABOVE HIGH LIMIT
CONTINUOUS ALERTS
CONTINUOUS ALERTS
3
2
1
