9
TORQUE MEASUREMENT
4. The
M
indicator blinks if the value
has been changed and not saved.
Press and hold the
M
button, until
the LED flashes and the alert beeps
to save the preset. The display then
returns to zero with the preset
indicator.
5. To set other Go/No Go presets
press and release the
M
button to
advance to presets two through
five. Check the preset indicator on
the left side of the display and fol-
low steps 3 and 4.
6. Press
P
and hold for more than
two seconds to turn OFF the
wrench.
WHEN M INDICATOR BLINKS PRESS AND
HOLD M TO SAVE CURRENT VALUE.
LED FLASHES AND UNIT BEEPS
TO CONFIRM SAVE
DISPLAY RETURNS TO ZERO WITH
PRESET INDICATOR
12.50
1
lbf-in
M
12.50
1
lbf-in
M
beep
0
1
lbf-in
