IMAporter Reader with MobileAccess function
–
installation guide
9/24
4.3
Setting up using IMAporter Reader Config
Setting up the reader identifiers is carried out using the
IMAporter Reader Config
for Android, which can be
downloaded here:
Note
: Setting up using the
IMAporter Reader Config
app is not required, if the MobileAccess (NFC, nor
BLE) function was not allowed in the configuration card.
4.3.1
Configuration app IMAporter Reader Config
The configuration app
IMAporter Reader Config
is designed for initial setup of identification settings and
communication encryption keys.
After starting the app, a screen is shown asking to input
Porter key
and
System ID
.
Porter key (System Key):
This Key is a secret shared password authorizing the user device to communicate with the reader / set of
readers and enciphering the communication between the reader and the mobile device.
The system admin is able to change the
Key
using the
IMAporter Reader Config
app at any time if needed.
He must however make sure that all authorized users have the correct
Key
entered in the
IMAporter
Mobile Key
apps, otherwise they would not be allowed to identify themselves at the reader.
