IMAporter Reader with MobileAccess function
–
installation guide
16/24
5.3
Testing user identification
5.3.1
Testing NFC identification
In case you have a device with NFC capabilities available, the easiest way to test the reader is as follows:
Turn on the display and place the phone directly to the reader. The device may remain locked and there is
no need to run any app. However, it is helpful to know the location of the NFC antenna of your mobile
device, and to place it to the center of the reader.
To test the NFC identification, tap the reader with your mobile device.
To identify using NFC, the screen needs to be lit, but the IMAporter Mobile Key app does not need to be
run.
5.3.2
Testing Bluetooth identification
RSW.04-B only (reader with BLE):
Navigate to
My doors
tab and tap the
+
button to search for a BLE
reader in range.
RSW.04-B only (reader with BLE):
Tap on the reader to view a configuration form and fill it in
•
MAC address - unique identifier of the reader
•
Name = “Demo Reader” (your
own name for the reader)
•
Automatic open - enable/disable simplified opening service
•
Default open signal - use individual or global signal strength for automatic opening
•
Custom signal strength to open - set individual opening signal strength
