Page 6 of 18
Ilumiline SL User Manual Rev. 1
Setup
DMX Linking
The Ilumiline SL will work with a DMX controller using a standard DMX serial connection. A DMX Primer is
available from
.
DMX Connection
The Ilumiline Power and Data Interface (sold separately) provides a DMX-512 connection using bare-ended
IP66-rated signal cable. This cable comes connected to the product.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Ilumiline
SL supports RDM protocol that
allows feedback to make changes to menu map options.
Beam
-
Shaping Filters
The Ilumiline
SL can be used with the Medium, Wide, Very Wide, or Asymmetrical beam-shaping filters
(sold separately). To change the filter, remove the 4 screws indicated below.
1. Ground
2. Data -
3. Data +
1. Ground (black clip)
2. Data -
(green clip)
3. Data +
(red clip)
DMX Output
Signal Connector
