Iluminarc Ilumiline SL, User Manual

Page: 12 / 21

Page 9 of 18
Operation
Ilumiline SL User Manual Rev. 1
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
To set the control personality:
1. Go to the PERSON main level.
2. Select the desired personality, from ARC1 , ARC1+D , ARC2 , ARC2+D , ARC FULL , SOLID , or
SPECIAL2 .
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address:
1. Go to the DMX main level.
2. Select the starting address ( 001 – 512 ).
Control Channel Assignments and Values
ARC1 (3 Channels)
ARC1+D (4 Channels)
ARC2 (4 Channels)
• See the Starting Address section for the highest starting address you can select for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
Personality Channels Highest Starting Address
ARC1 3 510
ARC1+D 4 509
ARC2 4 509
ARC2+D 5 508
ARC FULL 8 505
SOLID 1 512
SPECIAL2 9 504
Channel Function Value Percent/Setting
1 Red 000  255 0–100%
2 Green 000  255 0–100%
3 Blue 000  255 0–100%
Channel Function Value Percent/Setting
1 Dimmer 000  255 0–100%
2 Red 000  255 0–100%
3 Green 000  255 0–100%
4 Blue 000  255 0–100%
Channel Function Value Percent/Setting
1 Red 000  255 0–100%
2 Green 000  255 0–100%
3 Blue 000  255 0–100%
4 Lime 000  255 0–100%