Illinois Tool Works IJ300, Operation Manual

Page: 70 / 125

Controller
Section 6: Message Functions
Page 60 of 115 5760-121 Operations Manual Rev B
Making Adjustments During Printing
Product count and variable field data can be changed during printing, as long as the con-
troller has not been set up for Message Look Up, Network Mode, Network Notification or
Command and Control. Follow the instructions below for the type of information that needs
to be changed.
Adjusting Product Counts
To adjust product counts for the current print message, touch the Edit Counts button on
the Home Screen. The Product Counts dialog box is displayed:
The Total Count of All Products Printed is a non-printing count that is incremented every
print cycle. Touch the Reset button to reset this count to zero.
Touch the Adjust Print Counts... button to change the value of any printable count the cur-
rent print message may have. If the current message has no counts, the Adjust Print
Counts... button is grayed out.
Touch the OK button to close the dialog box and return to the Home Screen.
Edit Counts Button Edit Variable Fields Button