Illinois Tool Works IJ300, Operation Manual

Page: 66 / 125

Controller
Section 6: Message Functions
Page 56 of 115 5760-121 Operations Manual Rev B
Character Width Trait will adjust the width of all characters in the selected text field. The
factory default character width settings will produce characters and logos that are propor-
tional to each print head type:
Print Draft Mode : If this box is checked, every other column of the field will print.
Changing a Field's Font:
1. Select the field; its color changes from dark blue
to red.
2. Touch the Fonts button; the Fonts dialog box is
displayed with the current font selection high-
lighted.
3. Select the new font.
4. Touch the
OK button to close the Fonts dialog
and view the change. Touch the Cancel button to
discard the change and close the dialog box.
5. Press Enter to release the field; its color changes
from red to dark blue.
Edit Screen Keyboard Shortcuts
Ctrl X Cut the selected field from the print message.
Ctrl C Copy the selected field.
Ctrl V Paste (insert) the last field cut or copied at the current insert pointer location.
Ctrl S Save all changes made to the print message.
Ctrl O Open a message for editing or viewing.
Ctrl N Create a new print message.
Tab Moves from field to field, or to the first field.
F4 Shows the extended lower-case character dialog.
F8 Shows the extended upper-case character dialog.
Default Character Width
Print Head Type Fonts Logos (.bmp)
I.V. 100% 100%
IJ96, IJ192, IJ352 100% 600%
IJ768 200% 300%
WJ192 66% 400%