- 13 -
S-2018
REV. D
6. Position the Blower on the Waist Belt pad.
•
The charging socket should be accessible through the pad.
Attach the blower to the waist belt by passing the 4 straps
through the blower’s loops and snapping them to the back of the
waist belt pad.
•
For the S-4011 Decon and Quick Release Belt and Clip, follow
same steps as on page 11, then align the quick don snap features
as shown below and press belt clip firmly into place. The hole
in the clip should align with battery recharging port.
∆
WARNING
USE OF THESE RESPIRATOR SYSTEMS BY UNTRAINED OR UNQUALIFIED PERSONS OR
USE NOT IN ACCORDANCE WITH THESE INSTRUCTIONS MAY ADVERSELY AFFECT
RESPIRATOR PERFORMANCE AND RESULT IN INJURY OR DEATH.
USE OF THESE RESPIRATOR SYSTEMS MUST BE IN ACCORDANCE WITH APPLICABLE
SAFETY AND HEALTH STANDARDS, RESPIRATOR SELECTION TABLES CONTAINED IN
SUCH PUBLICATIONS AS ANSI Z88.2-1992, OR PURSUANT TO THE RECOMMENDATIONS
OF AN INDUSTRIAL HYGIENIST. USE OF A RESPIRATOR REQUIRES THAT A WRITTEN
RESPIRATOR PROGRAM BE IN PLACE, WHICH IS IN ACCORDANCE WITH THE OSHA
RESPIRATORY PROTECTION STANDARD FOUND IN 29 CFR 1910.134 PRIOR TO USING ANY
RESPIRATOR SYSTEM.
BEFORE USE, THE USER MUST BE TRAINED BY THE EMPLOYER IN THE PROPER USE
AND MAINTENANCE OF THE ILC DOVER SENTINEL XL™ PAPR CBRN SYSTEM. SUCH
TRAINING MUST BE IN ACCORDANCE WITH THIS USER INSTRUCTION. EACH PERSON
USING THESE RESPIRATOR SYSTEMS MUST FIRST READ AND UNDERSTAND THIS
ENTIRE USER INSTRUCTION. FAILURE TO DO SO MAY ADVERSELY AFFECT
RESPIRATOR SYSTEM PERFORMANCE AND RESULT IN INJURY OR DEATH.
IF THESE RESPIRATOR SYSTEMS FAIL ANY OF THE REQUIREMENTS OF THE USER
INSPECTION AND PERFORMANCE CHECK, DO NOT USE THE RESPIRATOR SYSTEM
UNTIL ALL NECESSARY REPAIRS HAVE BEEN PERFORMED AND THE RESPIRATOR
SYSTEMS PASS THE PERFORMANCE CHECKS. FAILURE TO DO SO MAY ADVERSELY
AFFECT RESPIRATOR SYSTEM PERFORMANCE AND RESULT IN INJURY OR DEATH.
Summary of Contents for S-5000 Series
Page 40: ... 39 S 2018 REV D ...
