6
An
HTL-STC
transmodulator module places the selected services of two DVB-S/S2 transponders
or two DVB-T/T2/C muxes of the FI-Sat 950-2150 MHz band or 51-858 MHz band, respectively, in
two DVB-T or DVB-C channels of the 51-858 MHz band. The module input connection is software-
configurable (“2 inputs” or “1 Input + Loop through”) and is equipped with DiSEqC function. Each
transmodulator includes a Web server.
An
HTL-TRX
transmodulator/transcoder modules offers the same transmodulation functionalities as
an HTL-STC, allowing also to transcode up to four MPEG4 (1080i or 576i) services to MPEG2 576i with a
maximun of four audio channels in total (AC3/AC3+ to MPEG1 Layer II).
3. Basic installation
This document explains how to perform a basic installation of a headend based on HTL-STC or HTL-TRX modules.
The document describes how the headend is configured. For that, initially the physical mounting is described. After
that, it explains how to connect the user pc to the headend through IKUSI HEADEND DISCOVERY application and how to
convert one of the modules into master module. Finally, it describes the steps that must be followed in order to define
a channel lineup, mainly focusing on the Wizard.
CFP-900
POWER
+24V
+18V
300 mA
(22 KHz)
+12V
9A
+13V
300 mA
(22 KHz)
+18V
300 mA
+13V
300 mA
I
TOT max
:700 mA
MSS-0520
Ref. 3656
Stand Alone Multiswitch (5 in-20 out)
FREQUENCY RANGE
SAT: 950-2300 MHz
TERR: 5-862 MHz
10/100
HTL-STC
Link/Act
10/100
Link/Act
DVB RF IN
LOOP OUT
IN 1
IN 2
IN
OUT
+VAUX
DVB RF OUT
CAM
10/100
HTL-STC
Link/Act
10/100
Link/Act
DVB RF IN
LOOP OUT
IN 1
IN 2
IN
OUT
+VAUX
DVB RF OUT
CAM
10/100
HTL-STC
Link/Act
10/100
Link/Act
DVB RF IN
LOOP OUT
IN 1
IN 2
IN
OUT
+VAUX
DVB RF OUT
CAM
10/100
HTL-STC
Link/Act
10/100
Link/Act
DVB RF IN
LOOP OUT
IN 1
IN 2
IN
OUT
+VAUX
DVB RF OUT
CAM
DVB-T/C
router
internet
Remote configuration through web interface of a headend station comprising 4 HTL-STC modules,
interconnected with an ethernet adapter (BUS IKUNET) + 1 CFP-900 power source.
3.1 Headend connection
The instructions for connecting the headend are described in detail in the guide that is provided with the
HTL-STC or HTL-TRX module. Also, that guide can be downloaded from our web page www.ikusi.tv
Briefly, the steps to follow are:
- Connect the different cables from the multiswitch to the module inputs.
- Interconnect the modules through the supplied ethernet adapters.
- Interconnect the output line bridges.
- Connect the power line.
- Connect the PC to a headend station module through its ethernet connection with an RJ-45 cable.
