27
Clicking on any of the boxes will activate the “apply default configuration”, moving on to the reset
confirmation window. Enabling the box to the left of the title will select all the headend modules.
5.1. Headend
5.1.2 (Un)Register Modules
All the modules which are connected to the IKUNET bus must appear on the screen inside a cell
headed by the type of module and the function it represents within the headend (slave). It also
shows the identification name, the MAC address, the serial number and the hardware version, all of
which are factory-set.
The master module is the only one which cannot be unregistered. Thus, it presents a padlock icon
instead of the recycle bin icon used to unregister modules.
The other modules can be registered or unregistered by clicking on the symbol or the recycle
bin icon respectively, and, more straightforwardly, by clicking on each of the modules and
dragging them from one window to the other.
A pop-up message shows whether the action has been carried out correctly or there has been any
type of error.
REGISTER ALL: Used to act on all modules at the same time and register them jointly in the
headend.
UNREGISTER ALL: Used to act on all modules at the same time and delete them jointly in the
headend.
