29
MULTISWITCH: It allows to select the multiswitch signal (or the LNB signal) to be received.
IF BAND: Low or High.
STATUS: It allows to enable or disable any of the two inputs of the module.
TRANSPONDER FREQUENCY: It allows to select the frequency value of the transponder to be
received.
INTERMEMEDIATE FREQUENCY: It allows to select the intermmediate frequency value to be
received.
In the case of DVB-T/T2 input, the configurable parameters will be as follows:
STATUS: It allows to enable or disable any of the two inputs of the module.
FREQUENCY: It allows to select the frequency value of the multiplex to be received.
BANDWIDTH: It allows to select the bandwith of the multiplex to be received.
HIERARCHY: In broadcasting with several hierarchies, it allows to select the hierarchy of the signal
to be received.
AUTOSCAN: It allows to enable or disable the automatic scan of the DTT inputs in case of a change
in the frequency plan.
Finally, when the input signal is DVB-C, the displayed parameters will be:
STATUS: It allows to enable or disable any of the two inputs of the module.
FREQUENCY: It allows to select the frequency value of the multiplex to be received.
SYMBOLRATE: It allows to select the symbol rate of the multiplex to be received.
CONSTELLATION: It indicates that the constellation of the input signal is detected automatically.
Push
Save
button to store the changes.
