Ikegami SDR-104 User Manual Download Page 75

Page: 75 / 117

8.5.3 Recording

Status



Camera is in normal operation.



Recording is stopped.



Above the maximum number of cameras allowed.

8.5.4 Motion Recording Status



Camera is in normal operation.



Recording is stopped.



Above the maximum number of cameras allowed.

8.5.5 Alarm In Connection and Operating Status



Camera is in normal operation.



Recording is stopped.



Above the maximum number of cameras allowed.

8.5.6 Alarm

Out

Connection and Operating Status



Camera is in normal operation.



Recording is stopped.



Above the maximum number of cameras allowed.

8.6 Remote Setting



User may change DVR’s Menu setup through CMS.



Remote Setting works only in Watch mode.



Click on REMOTE SETTING button in Watch mode and the following SETUP menu same as DVR’s will appear

on CMS screen.

Summary of Contents for SDR-104






















































































































Search results

Summary of Contents for SDR-104

Reviews:

Related manuals for SDR-104

Brands by name

Popular brands

Ikegami SDR-104, User Manual

Search results

Summary of Contents for SDR-104

Reviews:

Related manuals for SDR-104

Brands by name

Popular brands