16
2.2 Connector Wiring
2.2.1 Video-In/Out
Connections
Connect a camera to ‘
VIDEO IN
’.
If user wishes to link camera input to another device, please connect the camera to ‘
LOOP OUT
’.
Assure the ‘
VIDEO IN
’ and ‘
LOOP OUT
’ connections are connected properly, not oppositely.
(NOTE)
Only
B, C, D Type
model supports LOOP OUT connection.
2.2.2 Monitor Connections (Video Out, VGA, Spot)
Use with CCTV monitor and computer monitor. Please connect the CCTV monitor to ‘
VIDEO OUT’
, the computer monitor to
‘
VGA
’, respectively. If necessary, connect another CCTV monitor to ‘
SPOT
’,
‘MULTI SPOT’
or
‘SVHS’
.
(NOTE)
Only E Type model supports SVHS.
Multi Spot
(C, D Type)
-
This function supports Multi Channel Display on Spot Monitor
-
Connect BNC cable between spot monitor and multi spot port of rear panel.
2.2.3 HDMI connections (C, D Type)
Connect HDMI cable to HD out port of rear panel and HDMI port of HD output device.
Please click (
) SETUP> DISPLAY> VGA and the following screen will appear.
If user wishes to hear audio via HDMI cable, check the box HD Audio Output
Click the box below to select resolution.
-
User can select the resolution among ‘1920x1080 RB’, ‘1920x1080’, ‘1680x1050 RB’, ‘1680x1050’, ‘1280x1024’, and
‘1024x768’
-
The default setting of DVR is ‘1280 x 1024’.
(NOTE)
Only C, D Type supports
HDMI connect and Multi Spot.
