49
cameras can be set.
③
Select alarm outputs to be worked when Alarm In 1 is on. Please check
a check box under Link Alarm Out. More than
two alarm outputs can be set.
④
Select E-mail addresses for notification when Alarm In 1 is on. Please check
a check box under Link Notification. More
than two E-mail addresses can be set.
⑤
Repeat the above procedure for Alarm In 2~ Alarm In 16 (UP to 4 for
A, C Type
/ Up to 16 for
B, D, E Type
).
Choose ‘OK’ to confirm the setting.
4.6.2 Motion
Event
Please click (
) LINK>Motion Event and the following screen will appear.
Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
notification.
Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
Please follow the setup procedures below.
①
Click (
) Motion Event frame and select Motion Event 1.
②
Select cameras for recording when Motion Event 1 is on. Please check
a check box under Link Camera. More than
two cameras can be set.
③
Select alarm outputs to be worked when Motion Event 1 is on. Please check
a check box under Link Alarm Out. More
than two alarm outputs can be set.
④
Select E-mail addresses for notification when Motion Event 1 is on. Please check
a check box under Link Notification.
More than two E-mail addresses can be set.
⑤
Repeat the above procedure for Motion Event 2~ Motion Event 16.
Click(
)By Duration box to set up the recording duration and prevent recording caused by event.
The duration time can be controlled by previous setting mode: RECORD>Settings>Event
Choose ‘OK’ to confirm the setting.
4.6.3 Video
Loss
Please click (
) LINK>Video Loss and the following screen will appear.
