54
To save current camera number, select Preset No and
button click.
To move to preset, select preset No and
button click.
Available 1 ~ 255 Preset numbers can saved it depends on camera specification.
As explained earlier in
4.4.2.,
press Menu button to pop-up PTZ camera OSD setup screen and set up Tour and Pattern
items.
-
Since these functions make use of a memory function of the camera itself, user should set them in Camera OSD.
-
Once user completes the setup, close the Camera OSD menu.
-
User can conveniently use Tour and Pattern functions simply by clicking Tour and Pattern buttons.
-
Particulars on how to setup each function on OSD Menu are found in the manual of a corresponding camera.
(NOTE)
Suppose a command for using Tour function is 71 ~ 79 + PSET and if you had set Tour to 70, use Preset No: 1 ~ 9 + Tour
button to benefit the Tour function (70 + 1~9).
5.1.6 System
Log
Press
EVENT
key and the System Log screen will appear.
Please refer ‘SETUP>SYSTEM>System Log’ to learn different events listed on the System Log and see how to delete the
System Log.
5.1.7 Key
Lock
Press
AUDIO
>
FF
>
FORWARD
keys in sequence to operate the key lock function. This function is indicated by
icon in
the lower portion on the right-hand side of the screen.
Once the Key Lock function is on, user cannot use any key. If wish to use a key, please enter the correct password to
release the key lock function. If Password is not required, simply press ENTER
key.
5.1.8 Emergency
Recording
When user presses
EMERGENCY
key, recording starts right away regardless of preset recording mode.
Emergency recording is not operated while SETUP.
