IKA HRC 2 control Operating Instructions Manual Download Page 7

7

• Do not throw used battery packs into your household 

waste� Dispose of them properly in accordance with statu-
tory regulations�

End users are obliged by law to return all used dis-
posable and rechargeable batteries� Throwing them 
into the household waste is prohibited� Disposable/

rechargeable batteries containing harmful substances are 
marked with this symbol to indicate that they may not be 
disposed of as household waste�

• You can return used disposable and rechargeable batter-

ies free of charge to your local authority collection site or 
to any battery retailer� In doing so you will be complying 
with statutory regulations and helping to protect the envi-
ronment�

• Batteries must be disposed of in accordance with local 

and national regulations�

• When the battery pack is inserted it should slide in easily 

and without resistance� Do not force it� 

• If the battery pack is removed for an extended period of 

time, store it in a sealed plastic bag to prevent short-circu-
iting due to moisture or contact with metal components�

• The operating temperature range of the battery pack is 

from 0 °C to + 45 °C� Note that the battery pack capacity 
will be reduced at temperatures below 20 °C�

• Only the rechargeable battery types recommended in the 

technical data may be used in the device!

Do not charge batteries that have leaked or that are 
discolored, deformed or damaged in any other way�

Disposal instructions:

• When disposing of the 

IKA

®

 battery pack, please tape over 

the contacts with adhesive tape to prevent short-circuiting 
due to moisture or contact with metal components� Short-
circuiting may result in an explosion�

Correct use

• Use:

Use 

HRC 2

 (Heated Recirculating Chiller) for tempering 

and circulating fluids�

Intended Use: Tabletop device

• Range of use (indoor use only):

- Laboratories 

- Schools

- Pharmacies 

- Universities

• Wireless remote control:

Before using the wireless link between the 

WiCo

 and the 

laboratory device, first check whether your region is in-
cluded in the radio communication approval for the de-
vice� If it is not, remote control can also be performed 
using a USB cable�

This device is suitable for use in all areas except: 
- Residential areas 
- Areas that are connected directly to a low-voltage supply 

network that also supplies residential areas�

The safety of the user cannot be guaranteed: 
- If the device is operated with accessories that are not sup-

plied or recommended by the 

IKA

®

- If the device is operated improperly or in contrary to the 

IKA

®

 specifications� 

- If the device or the printed circuit board are modified by 

third parties�

Summary of Contents for HRC 2 control


































Reviews: