15
Note:
In standby status, press the right knob (R) to start
the pump function, the tempering function will not be ac-
tivated�
In working status, press the left knob (P) to stop the temper-
ing, the pump keep running�
When the
WiCo
is switched on without being connected to
the
station
, the green LED bar (C) and the green Bluetooth
®
LED (G) on
station
lights up�
The control elements of the
WiCo
allow to be locked by
pressing the lock button (V) about 2 seconds, so no acci-
dental changes during operation are possible (lock symbol
appears in the display)�
By pressing lock button (V) about 2 seconds again, the con-
trol elements are released (lock symbol
disappears from
the display)�
Useful information
The
station
is controlled via a
WiCo
� If the
WiCo
is mount-
ed on the
station
, data is exchanged between the
station
and
WiCo
via the contacts (D)� The screen of the
WiCo
dis-
plays the home icon �
The
WiCo
is equipped with a USB socket (Universal Serial
Bus) with which the
WiCo
can be connected with
station
,
the USB icon
appears on the screen�
If the
WiCo
is not connected with
station
via a USB cable,
the data exchange between the
station
and the
WiCo
via
Bluetooth
®
� In this case, the Bluetooth
®
icon is displayed �
Depending on the structure of the building, the
WiCo
can
be operated at a distance up to 15 m from the
station
, us-
ing the Bluetooth
®
connection�
The
WiCo
could be either installed on the
station
or put
on a safe place where is accessed easily by the user during
operation�
If the
WiCo
is mounted on the
station
, the battery is
charged through the contacts (D)�
The battery could also be charged via the USB port on the
WiCo
(See “Charging the Battery Pack RB 1“ in “Prepara-
tions“ section)�
Note:
In an emergency, the device function can be turned off
by pressing the “safe STOP” key (E) at the front of
station
�
The LED bar (C) changed into red color�
A message appears in the display indicates that the
station
was forced off� To restart, press the power switch (6) or On/
Off button (A) off and on again�
If the Bluetooth
®
function of the
WiCo
is activated, the
Bluetooth
®
icon appears on the screen and the user can
search the
WiCo
by pressing the searching button (F)� Then,
a beep is heard�
