Access Option
Draco vario
DisplayPort
1.1
62
The following keyboard commands are used to enter, and to exit the command mode, and to change the
Hot Key.
Function
Keyboard command
Enter command mode
2x <Left Shift>
(Hot Key, factory setting)
Exit command mode
<Esc>
and also
<Left Shift> + <ESC>
, if necessary
Change Hot Key
<current Hot Key>, <c>, <new Hot Key code>, <Enter>
Hot Keys currently can only be changed at the console and only for that console.
Keyboard commands are fixed to the position of the keys on the keyboard. Keyboard mapping tables may
vary for country-specific layouts. E.g.,
<Hot Key> + <a>
transfers the EDID on a German or US
keyboard layout. The French keyboard layout (AZERTY) requires for the same command the
<Hot Key>
+ <q>
keyboard command to be pressed instead.
Note the key position of a freely defined Hot Key when changing the keyboard layout, e.g., from
QWERTZ to AZERTY.
Hot Key Code
The Hot Key to enter the command mode can be changed. The following table lists the Hot Key codes for
the available Hot Keys.
Hot Key Code
Hot Key
0
Freely selectable, except
<ESC>
and
<Enter>
2
2x <Scroll>
3
2x <Left Shift>
(default)
4
2x <Left Ctrl>
5
2x <Left Alt>
6
2x <Right Shift>
7
2x <Right Ctrl>
8
2x <Right Alt>
NOTICE
In a combined KVM matrix/U-switch configuration, select different Hot Keys for the connected extender
modules, e.g.,
2x <Left Shift>
for access to the matrix and e.g.,
2x <Right Shift>
for access
to the U-Switch.
Set a freely selectable Hot Key (exemplary)
To set a freely selectable Hot Key (e.g.,
2x <Space>
), enter the following keyboard sequence:
<current Hot Key>, <c>, <0>, <Space>, <Enter>
Change the current Hot Key (exemplary)
To change the current Hot Key to, e.g.,
2x <Left Alt>
, enter the following keyboard sequence:
<current Hot Key>, <c>, <5>, <Enter>