Technical Data
Draco vario
DisplayPort
1.1
90
9
Technical Data
9.1 Interfaces
9.1.1 DisplayPort 1.1
Upstream/Downstream
The pins of the DisplayPort sockets are assigned differently.
Upstream: data is sent (e.g., source, graphics card, video output of a device)
Downstream: data is received (e.g., sink, monitor, video input of a device
Video
The video interface supports the DisplayPort 1.1 standard. All signals that comply with this standard can be
transmitted. Depending on the control of the monitor (type of blanking), different transmission rates result
for single-head operation or dual-head operation.
Parameter
Resolution
Data rate Color
depth
Trans-
mission
rate
Single-Head operation
(primary channel)
1920 x 1080 @ 120 Hz (reduced blanking) 5,97 Gbit/s 8 bit
(4:4:4)
HBR
1920 x 1200 @ 60 Hz (normal blanking)
3,32 Gbit/s
1920 x 1200 @ 120 Hz (reduced blanking) 6,64 Gbit/s
2560 x 1440 @ 60 Hz (normal blanking)
5,31 Gbit/s
3840 x 2160 @ 30 Hz - UHD (reduced
blanking)
5,97 Gbit/s
4096 x 2160 @ 30 Hz - 4K DCI (reduced
blanking)
6,37 Gbit/s
Single-Head or
Dual-Head operation
(primary channel)
1920 x 1080 @ 60 Hz (reduced blanking)
2,96 Gbit/s 8 bit
(4:4:4)
RBR
1920 x 1200 @ 60 Hz (reduced blanking)
3,32 Gbit/s
NOTICE
Dual head operation depending on the transmission rate
Dual-head operation is only possible with the transmission rate RBR. If the primary channel (DisplayPort)
is controlled in dual-head operation with the transmission rate HBR, no picture is displayed on the
secondary channel (Mini DisplayPort).
Audio
Various audio formats can be transmitted through the interface.
Parameter
Value
Standards
Stereo Linear Pulse Code Modulation (LPCM), DTS, DTS-HD (5.1), Dolby
Digital, Dolby Digital Plus (5.1)
Bit depth
16 to 24 bit
Sample rate
32 to 192 kHz