Ihse Draco vario DisplayPort 1.1 483 Series User Manual Download

Page: 8 / 126

Important Information

Draco vario

DisplayPort

1.1

Important Information

1.1 Firmware and Software

The information in this manual refers to the latest extender firmware available at the date of manual
release. Please refer to the change log (see chapter 16, page 126) for user manual updates.

1.2 Symbols for Warnings and Helpful Information

The meaning of the symbols used for warnings and helpful information in this manual is described below:

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

NOTICE

NOTICE identifies information, if not observed, endangers the functionality of your device or the security

of your data.

This symbol indicates information about special features on the device or when using device and function

variants.

This symbol indicates instructions for procedures recommended by the manufacturer for an effective

utilization of the device potential.

1.3 Spellings

Uniform spellings are used in this manual for better readability or easier assignment.
The following spellings are used for products:

Term

Description

Tera Tool

Management software

Source

Computer, CPU

Sink

Console (monitor, keyboard, mouse)

The following spellings are used for keyboard commands:

Keyboard command

Description

<key>

Description of a key on the keyboard

Press keys simultaneously

Press keys successively

2x <key>

Press key quickly, twice in a row (like a mouse double-click)

Summary of Contents for Draco vario DisplayPort 1.1 483 Series































































































































Search results

Summary of Contents for Draco vario DisplayPort 1.1 483 Series

Reviews:

Related manuals for Draco vario DisplayPort 1.1 483 Series

Brands by name

Popular brands

Ihse Draco vario DisplayPort 1.1 483 Series, User Manual

Search results

Summary of Contents for Draco vario DisplayPort 1.1 483 Series

Reviews:

Related manuals for Draco vario DisplayPort 1.1 483 Series

Brands by name

Popular brands