Ihse Draco vario DisplayPort 1.1 483 Series User Manual Download Page 72

Page: 72 / 126

Configuration

Draco vario

DisplayPort

1.1

7.5.1 Parameters for CPU Units

The following parameters can be written into the configuration file of a CPU Unit. In the

Series

column is

listed if there is a restriction to certain devices (e.g., L483-B2xx) or if the mentioned parameters are
available for the complete series (e.g., L483 / L493).

EDID Management

Parameter

Function

Series

LOCKEDID

Activate EDID write protection

L483 / L493

WREDID2

Write 2. EDID (only needed for manual update via mini-USB)

L483-B2xx,

L493-B2xx

Digital-Audio

Parameters available only in conjunction with additional modules for digital audio.

Parameter

Function

Series

SRC32000

Activate sample rate conversion, sample rate 32 kHz (only with

digital audio add-on module)

L483 / L493

SRC44100

Activate sample rate conversion, sample rate 44.1 kHz (only with

digital audio add-on module)

L483 / L493

SRC48000

Activate sample rate conversion, sample rate 48 kHz (only with

digital audio add-on module)

L483 / L493

SRC88200

Activate sample rate conversion, sample rate 88.2 kHz (only with

digital audio add-on module)

L483 / L493

SRC96000

Activate sample rate conversion, sample rate 96 kHz (only with

digital audio add-on module)

L483 / L493

SRC176400

Activate sample rate conversion, sample rate 176.4 kHz (only

with digital audio add-on module)

L483 / L493

SRC192000

Activate sample rate conversion, sample rate 192 kHz (only with

digital audio add-on module)

L483 / L493

SRC_NONE

Deactivate sample rate conversion (only with digital audio add-

on module)

L483 / L493

SRCXXXXX;X

Set a delay, enter the appropriate value X in milliseconds, both

parameters separated by a semicolon, e.g., SRC32000;8

If this information exceeds the FIFO size, the highest possible

value is set.

L483 / L493

Balanced Audio

Parameters available only in conjunction with additional modules for balanced audio.

Parameter

Function

Series

SRC32000

Activate sample rate conversion, sample rate 32 kHz (only with

digital audio add-on module)

L483 / L493

SRC44100

Activate sample rate conversion, sample rate 44.1 kHz (only with

digital audio add-on module)

L483 / L493

SRC96000

Activate sample rate conversion, sample rate 96 kHz (only with

digital audio add-on module)

L483 / L493

When using another parameter for balanced audio than the three mentioned above there will be a sample

frequency of 48 kHz.

Summary of Contents for Draco vario DisplayPort 1.1 483 Series































































































































Search results

Summary of Contents for Draco vario DisplayPort 1.1 483 Series

Reviews:

Ihse Draco vario DisplayPort 1.1 483 Series, User Manual, Page: 72 / 126

Search results

Summary of Contents for Draco vario DisplayPort 1.1 483 Series

Reviews: