IHI Shibaura G-EXE22-OMEGA-C11, Operator'S Manual

Page: 81 / 106

Wrench
Bedknife adjustment handle
Blades
Bedknife
Newspaper
Blade
alignment
clamp
!
The gap between the blades and the lower blade is nar-
rowed by rotating the lower blade adjustment handles in
the clockwise direction, and widened by rotating the han-
dles in the counterclockwise direction.
3. Use the newspaper strips to test the cutting sharpness of
the blades in three locations at the center, left, and right
sides. Repeat these adjustments until the newspaper is cut
cleanly.
!
Adjust the cutting sharpness of all blades.
4. Test the cutting sharpness. Rotation of the blades is nor-
mal if all of the newspaper strips are cut cleanly by all
blades in any position.
Adjustments
27