IHI IC75, Operation Manual, Page: 8 / 106

IC75 ENG 0-2
SAFETY INFORMATION
We offer you basic and important rules and precautions for safe operations.
Read, understand, and observe them before starting operation. This is the most essential way to
prevent accidents.
Wrong operation, inspection, or maintenance can cause personal injury or death.
Throughout this manual and on the machine, precautions are provided with marks and
classified by the words “ DANGER ”, “ WARNING ”, and “ CAUTION ” according to their extent of
danger.
The classification is as follows:
DANGER
indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
indicates a potentially hazardous situation which, if not avoided, could
result in minor or moderate injury. It may also be used to alert against
possible damage to the machine and its components.
IMPORTANT
indicates a potentially hazardous situation which, if not avoided, could
result in the damage of the machine or the performance and the
decrease in longevity are caused.
We have made very effort for you to prevent accidents during operation, however, we cannot be
held responsible for predicting every kind of danger in all operating conditions.
It is the owner or user of the machine who is responsible for
ALWAYS paying attention to
operate the machine; as well as reading and understanding this manual enough to obtain the
essential knowledge and skills fundamental to correct machine operation.
WARNING
•
BEFORE inspection, operation, or maintenance of the machine, be sure to read and
understand this manual.
•
Incorrect operation or maintenance of the machine can cause the accident and serious
injury or death.
•
Keep this manual on hand during operation so that you can immediately consult it when
necessary. If it should be missing or damaged, place an order from IHI distributor for a
replacement.
•
There are various kinds of federal, state, and local regulations that effect construction and
industrial machinery. Since the regulations are subject to change, and differ from one
locale to another, it is impossible for us to provide such information in this manual.
It is the responsibility of the owner or user to be familiar with the regulations.
•
Specifications and materials of the machine are subject to change without any obligation
on the part of the manufacturer.