IHI IC75, Operation Manual, Page: 71 / 106

MAINTENANCE
IC75 ENG 4-7
LUBRICATE THE GREASE
Refill the grease nipples with grease using a grease gun.
Remove oozed old grease after refilling.
Body
WARNING
Be sure to set the safety bars under the body when
lubricating with the body raised.
•
Hinge pins of the body rear gate (1) 2 positions
•
Lock pins of the body rear gate (2) 2 positions
•
Control springs of the body rear gate (3) 2 positions
•
Body joint pins (4) 2 positions
•
Dump cylinder rod pins (5) 2 positions
•
Dump cylinder foot pins (6) 2 positions
Oscillating link
•
Oscillating link pins (7) 8 positions
IMPORTANT
Grease the link pins everyday before starting works
if the machine is used on damp grounds or in mud.
Control lever
•
Foot pin of the travel lever (8) 1 position
•
Foot pin of the dump lever (9) 1 position
•
Link pin of dump lever linkage (10) 1 position