IHI IC75, Operation Manual, Page: 12 / 106

SAFETY
IC75 ENG 1-2
CHECK THE JOB SITE.
•
Confirm in advance if there are any dangerous
locations where the land collapses or where machine
can fall off a cliff, etc.
•
Take measures necessary for safety in dangerous
locations.
CAREFULLY MOUNT AND DISMOUNT THE MACHINE.
•
Maintain a three point contact (Two feet and one hand
or one foot and two hands contact) with the steps and
handholds.
•
Do not use any controls as handholds when entering or
leaving the operator’s station.
•
When any oil or other slippery substance has got
adhered to hand rails or steps, wipe them off clean.
START THE ENGINE WHILE SITTING IN THE
OPERATOR SEAT
If the engine is started from a position other than sitting in
the operator seat, there is the danger that the machine
starts moving suddenly.
Start the engine only after carrying out checks while
sitting in the operator seat.
CONDUCT WARM-UP BEFORE OPERATION.
If the machine is operated without carrying out sufficient
warming up operation, it can lead to movements not
intended by the operator, and can lead to accidents.
Always carry out sufficient warming up operation.