Integrated Battery Backup
The standard i700 is shipped with a 1.2AH Battery Backup Module
If required an additional 1.2AH battery pack can be fitted. This is supplied with a specific IGD
cable set to add the battery in parallel to the existing battery. Third party units must not be used.
additional battery module part number I700-BAT-2
The battery is shipped separate from the control panel. Locate the battery in the panel once it is
mounted as indicated in the overview diagram. The batteries are shipped ready charged for
operation. Connect the battery to the charge management PCB with the cable provided
Charge Control PCB
Status LED’s
Note these are duplicated
on the controller front panel
NC
NC
The Single Pole relay changes state when mains power is
lost and the Tocsin 700 runs on the battery pack. It can
therefore be used to remotely indicate mains power loss.
The relay is rated at 7A 250V Non Inductive. Note the
relay is powered in normal operation and opens on alarm
or power loss.
0V DC
12V DC
0V DC
12VDC
0V DC
24V DC
0V DC
24V DC
DIP Switch for
Function Setup
Test Points
Page 46 of 52
