COPY FROM 01
COPY FROM 01
COPY FROM C01
TO RANGE C02 TO CO2
TO RANGE C02 TO CO2
TO RANGE C02 TO CO8
Copy Alarm Setup Command
Select the COPY ALARM SETUP if you want to copy the complete alarm setup from one channel to
multiple others. This can be used to speed setup where there are many sensors/channels that are to
have the same alarm levels set. Each channel can then have any minor amendments made after
copying the majority of the setup thus speeding up the setting up process of the control panel.
1
2
2
Note the COPY FROM channel number is
flashing. This is the channel who’s setup you
wish to copy to other channels. Rotate the jog
wheel if you wish to select a different channel
to be copied from. Once the selection is
correct press the jog wheel
Select the COPY ALARM SETUP menu item
and the following setup screen is displayed.
The first of the copy to channel numbers is
now flashing. Again rotate the jog wheel until
the first channel number in the range you
wish to copy to is displayed. Press the jog
wheel when the first channel in the range to
copy to is indicated.
The second of the copy to channel numbers
is now flashing. Again rotate the jog wheel
until the last channel number in the range you
wish to copy to is displayed. Press the jog
wheel when the last channel in the range to
copy to is indicated.
In this example the alarm setup from channel
one will be copied to channels two through
eight.
Page 28 of 52
