ACCEPTANCE TESTING
7-9
CONNECTION TO RADIO to OUTPUT TO RADIO TEST SET path loss
Specification
Maximum reverse power
2 W (+33 dBm).
Path loss from radio
<
−
13.5 dB typical.
Test equipment
As above.
(1) Reconnect the chained 50
Ω
termination to INPUT FROM RADIO TEST SET on the rear
panel.
(2) Connect the cable between RF OUTPUT from tray A and CONNECTION TO RADIO.
(3) Connect the power meter to OUTPUT FROM RADIO TEST SET.
(4) On the UUT set source A to:
[Carr Freq]
1000
[MHz]
[RF Level]
−
10 [dB]
Record the power meter reading: _____________ dBm
(5) Ensure that the figure above is between
−
22 dBm and
−
25 dBm.
