FIRST TIME USE
3-11
Using the steps keys
The selected function’s parameter may be adjusted in steps using the [
ñ
] and [
ò
] keys to
respectively increment and decrement the parameter. The step size can be set as follows:
(1) Press the [SET
∆
] key which causes the
Steps Menu
to be displayed (see Fig. 3-5 below).
This shows the step sizes of the currently selected signal source.
B3885
Fig. 3-5 Steps menu
(2) Select
[Carrier Step],
enter the value on the key pad and press a terminator key. The step
value will appear on the screen.
(3) Return to the Signal Generator menu by pressing [SIG GEN].
(4) Using the [
ñ
] and [
ò
] keys respectively will now increment or decrement the carrier
frequency by the set value.
(5)
[RF Level Step], [ModFreq Step]
and
[FM Step], [AM Step]
and
[
ϕ
M Step]
values can be
entered in the same way.
(6) Repeat as required for the other signal sources.
